Sealing End Cover- NBEC FKM-75

Sealing End Cover, also known as Blind Cover, Cover Seal, Sealing Cap.

The Sealing End Cover is used to close bores or to replace bearing seals.

The Sealing End Cover – NBEC FKM-75 (brown) is a special End Cover Seal that consists of a rubber-coated metal part. The Sealing End Cover is designed to seal against grease, oils and water in rotary applications. A standard Sealing End Cover is designed to run at a maximum pressure of 0.5 bar.

PROFILE


PRODUCT ADVANTAGES
• Can be used both for static and rotating applications
• Good resistance to many mineral oils and greases
• Excellent heat resistance
• Good chemical and solvent resistance
• Good ageing and ozone resistance
• Easy installation and removal

APPLICATION
Used in almost every industry as a good reliable sealing in rotating machines, shafts, axles, power tools and gearboxes. End Covers are used to secure sealing in openings for shafts or axles and to plug seal service bores.

INSTALLATION
Installation according to DIN 3760. It is very important that the assembly tools must be of soft material and have no sharp edges. For installation use a hydraulic or mechanical pressure device to press the sealing end cap into the housing bore hole or gently use a rubber hammer to carefully hit the sealing end cap into place. It is important to distribute the pressure or hammer strikes evenly over the whole surface of the end cap.

NOTES
For higher pressure use a circlip to secure the end cover seal.